|
|
|
|
Description:
|
s3EnetAuthNodesTable OBJECT-TYPE
SYNTAX SEQUENCE OF S3EnetAuthNodesEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Table containing a list of MAC addresses and the slot
and ports that the MAC address is allowed to be heard on,
in case the authorized node feature is turned on.
If a MAC is allowed on any slot and port then the entry
will have the slot=0 and the port=0. If the MAC address
is allowed on a particular board then slot=allowed board
and port=0. If the MAC is only allowed on one port then
the entry will contain a slot value and port value
between 1-12.
Allowed nodes for LattisSecure ports must be configured
for that specific port. The agent will reject an attempt
to create a slot-level entry for slot=x, port=0, if the
board in slot x is a LattisSecure Host Module. Only a
single address may be configured for a LattisSecure port.
Adding a second address (with the same LattisSecure
slot-port number) to the table will cause the first
address to be replaced with the new entry.
A MAC address can only appear in the table one time.
To determine when a station heard on the network must
be verified in this table please read the complete
description of the authorized node list feature as
described with object S3EnetConcAuthStatus.
Entries in this table may be downloaded via the CFG file
or can be added via SNMP. All adds via SNMP will be
lost when the system is reset."
|
|
Disclaimer: The owner of this site does not warrant or assume any liability or responsibility for the accuracy, completeness, or usefulness of any information available on this page (for more information, please read the complete disclaimer).
All rights reserved, Orange © 2024 |
iso(1)
s3EnetAuthNodesEntry(1) 
